nfcs
 |
None |
bionixcmp
 |
None |
ndplugingauss
 |
None |
imgdaq
 |
None |
piezocompensation
 |
None |
adsis8300ws
 |
None |
vac_ctrl_mks910_vpm7
 |
None |
cavityidentification
 |
None |
cavitytester
 |
None |
pvxsave
 |
None |
mrfioc2ess
 |
None |
gsl_limited
 |
None |
lfdcoefficients
 |
None |
cavitypimodes
 |
None |
rf_orchestration
 |
None |
ndpluginsds
 |
None |
sdsioc
 |
None |
fwsscan
 |
None |
fwsidc
 |
None |
fwsoptbe
 |
None |
piezocapacitance
 |
None |
timer
 |
None |
julabo
 |
Wrapper for julabo module |
ipmhv
 |
|
m375p
 |
None |
drvasyniseghalservice
 |
None |
iseghps
 |
None |
cmsdc
 |
None |
piezoidentification
 |
None |
wsbackend
 |
None |
aptmdaq
 |
None |
adxda
 |
None |
libxda
 |
None |
outputlimit
 |
None |
ccmap
 |
None |
cavitysimulator
 |
None |
cmsps
 |
None |
motorphytron
 |
|
fht6020
 |
None |
mpsospwrsup
 |
|
datalogger
 |
None |
bwsidc
 |
None |
keysight_dsox1204a
 |
None |
fftw
 |
None |
ipbus
 |
None |
fftwlibs
 |
|
open62541
 |
None |
mpssystem8700
 |
None |
nblmdaq
 |
None |
caensy
 |
|
keysight_dsox1204
 |
None |
rs_rtb2004
 |
None |
srf_cavtuningsensitivity
 |
|
ts2_cavityoperation
 |
|
iseghal_service
 |
|
rs_osp230
 |
EPICS Support for R&S Open Switch and Control Platform |
displayform
 |
None |
srf_cplconditioning
 |
This is a project to maintain for TS2 coupler conditioning IOC application. |
smartcam
 |
|
janitzaumg96rm_pn
 |
|
nclpwrup
 |
NCL Warm Up Module |
pvxs
 |
None |
asynfile
 |
None |
pmu905
 |
None |
ecmc_socketcan
 |
|
mpssis
 |
None |
icblmdaq
 |
DAQ for icBLMs |
prlpcb
 |
Pressure and Humidity control Module for Phase Reference Line |
prltcb
 |
Pressure and Humidity control Module for Phase Reference Line |
evrsnifferioc
 |
None |
adaravis
 |
|
ts2evm
 |
ts2evm is an E3 module dedicated to Test Stand 2 Timing System. It runs on top of the mrfioc2 support for the MRF MTCA Event Master (mTCA-EVM-300). This module is intended to be used by the IOC that controls TS2 EVM. |
hmc804x
 |
Wrapper for HMC804x module |
dtlhighlevel
 |
DTL Orchestration Module |
dtlcavm2
 |
DTL Cavity Control System Master2 Module |
dtlcavm1
 |
DTL Cavity Control System Master1 Module |
cfprocessms
 |
e3 wrapper for cfprocessms module |
cfhvacms
 |
e3 wrapper for cfhvacms module |
rssmx100a
 |
E3 wrapper for rssmx100a-epics-ioc module (R&S RF generators) |
rfsccu
 |
EPICS StreamDevice e3 module for Temperature Compensating Unit - T6TCU02 from AFT microwave |
biltitest
 |
BiltITEST stream-based module |
dtlskid
 |
DTL skid sequencer module |
lm510
 |
E3 wrapper for https://gitlab.esss.lu.se/epics-modules/lm510 |
tdklambdaz
 |
E3 wrapper for https://gitlab.esss.lu.se/epics-modules/tdklambdaz |
ruckig
 |
None |
keller33x
 |
|
wirescanner
 |
WireScanner scanning application (developed by Elettra) |
xdma
 |
Library for the Xilinx DMA/Bridge Subsystem for PCI Express (XDMA) |
iocmetadata
 |
E3 wrapper for iocMetadata module |
lobox
 |
Module for RF LO and LOD Boxes |
hfc8
 |
|
rf_power_station
 |
E3 module for RF Power Station PLC |
rs_nrpxxsn
 |
EPICS Support for R&S NRPxxSN Power Sensors |
wavepro
 |
e3 wrapper for wavepro module |
cfhvms
 |
e3 wrapper for cfhvms module |
m300_gps
 |
None |
snmp
 |
e3 wrapper for the EPICS SNMP module. The SNMP module provides support for the SNMP communications protocol, and includes device support for a number of SNMP-enabled devices. |
rflps_sim
 |
RFLPS - Slow Interlocks Module (SIM) |
mebtbuncheramp
 |
MEBT Buncher Amplifier (BTESA SSPA) |
bpmrffeioc
 |
E3 Wrapper for BPMRFFE project |
momuda
 |
E3 wrapper for master oscillator data aqusition |
vac_ctrl_sens4_vpm7
 |
Wrapper around vac_ctrl_sens4_vpm7 |
vac_ctrl_tpg300_500
 |
|
vac_ctrl_digitelqpce
 |
|
beamprod
 |
Operation Beam Production EPICS Module |
cabtr
 |
e3 EPICS cabtr module. cabtr allows a user to communicate with a CABTR device and to send curve file data directly to it via Channel Access. |
npm
 |
E3 Support for PBI Non-invasive Profile Monitor |
fbis
 |
FBIS supervisor EPICS IOC |
dln
 |
e3 module for a DLN. Streamdevice based. |
modulator
 |
EPICS support for ESS HV Modulators (E3) |
mca
 |
e3 wrapper for EPICS mca module. The mca module provides device support for Multi-Channel Analyzers and Multi-Channel Scalers. It also implements the mca record type. |
scu
 |
e3 module for a SCU. It is streamdevice based. |
emudaqsim
 |
E3 wrapper for the EMUDAQSIM project (DAQ emulator) |
crome
 |
None |
adifc14
 |
areaDetector driver for IOxOS IFC1410 running standard data acquisition (scope) firmware |
ADGraphicsMagick
 |
None |
supercycleengine
 |
|
adps4000a
 |
e3 wrapper to compile PicoScope technologies PS4000A models EPICS module |
rs_nrpz
 |
e3 wrapper to compile EPICS module supporting R&S NRPZ instrument drivers |
prlamppdc
 |
Wrapper for PRL Amplifiers and Phase Drift Compensation |
mpsplc
 |
|
opcua
 |
e3 wrapper to handle installation of OPC/UA components. OPC/UA is a communications protocol for PLCs and other instrumentation. |
magnetps
 |
Module used to add magnetic field conversions to a power supply device |
adsis8300bcm
 |
E3 wrapper for adsis8300bcm |
openipmi
 |
e3 wrapper for openIPMI. OpenIPMI is an effort to create a full-function IPMI system to allow full access to all IPMI information on a server and to abstract it to a level that will make it easy to use. |
caensyproxy
 |
Proxy module for CAEN SYx527 power supplies |
essioc
 |
Virtual module that enables standard ESS infrastructure: autosave, recsync, caputlog, iocstats |
llrfsystem
 |
|
opcua-build
 |
e3 wrapper for opcua build process. Separated from the opcua wrapper as the build process requires access to restricted libraries. OPC/UA is a communications protocol for PLCs and industrial instrumentation. |
evr_seq_calc
 |
E3 wrapper for the evr sequence calculator |
sorensen
 |
E3 wrapper for https://gitlab.esss.lu.se/epics-modules/sorensen |
caenelsmagnetps
 |
E3 wrapper for https://gitlab.esss.lu.se/epics-modules/caenelsmagnetps |
tdklambdagenesys
 |
E3 wrapper for https://gitlab.esss.lu.se/epics-modules/tdklambdagenesys |
fug
 |
E3 wrapper for https://gitlab.esss.lu.se/epics-modules/fug |
sairem
 |
E3 wrapper for https://gitlab.esss.lu.se/epics-modules/sairem.git |
sis8300
 |
None |
sis8300drv
 |
ESS Site-specific EPICS module : sis8300drv |
sis8300llrf
 |
SIS8300 LLRF IOC |
sis8300llrfdrv
 |
SIS8300 LLRF userspace driver |
nds
 |
Nominal device support |
loki
 |
LOKI library |
ads
 |
ESS Site-specific EPICS module : ads |
BeckhoffADS
 |
ESS Site-specific EPICS module : Beckhoff ADS |
ecmccfg
 |
ESS Site-specific EPICS module : ecmccfg |
EthercatMC
 |
ESS Site-specific EPICS module : EthercatMC |
motor
 |
e3 wrapper for EPICS motor module. The motor module implements the motor record, and provides device support for a wide range of motor controllers. |
ecmc
 |
ESS Site-specific EPICS module : ecmc |
exprtk
 |
ESS Site-specific EPICS module : exprtk |
nds3
 |
e3 wrapper for EPICS nds3 module. NDS (Nominal Device Support) is a library that allows to write device supports for a variety of control systems (CS) by hiding the details of the chosen CS and focusing on device functionalities. |
nds3epics
 |
e3 wrapper for nds3epics module. nds3epics contains the EPICS layer for the NDS3 framework. |
tsc
 |
E3 Specific Module for tsc kernel driver, tsclib linux library and TscMon linux application |
ifcdaqdrv
 |
IFCDAQDRV is the library that implements an API to access IOxOS MTCA cards using TSC driver |
ADSpinnaker
 |
ESS Site-specific module : ADSpinnaker |
ADURL
 |
None |
ADPluginCalib
 |
None |
ADPluginEdge
 |
E3 meta layer for ADPluginEdge module |
ADPointGrey
 |
ESS Site-specific module : ADPointGrey |
ADProsilica
 |
ESS Site-specific EPICS module : ADProsilica |
ADAndor3
 |
ESS Site-specific module : ADAndor3 |
ADGenICam
 |
ESS Site-specific EPICS module : ADGenICam |
ADAndor
 |
e3 wrapper for EPICS areaDetector driver for CCD detectors from Andor Technology using Version 2 of the Andor Software Development Kit (SDK). |
NDDriverStdArrays
 |
ESS Site-specific EPICS module : NDDriverStdArrays |
ADCSimDetector
 |
ESS Site-specific EPICS module : ADCSimDetector |
ADSimDetector
 |
ESS Site-specific module : ADSimDetector |
ADCore
 |
ESS Site-specific module : ADCore |
ADSupport
 |
ESS Site-specific module : ADSupport |
iocshUtils
 |
ESS Site-specific module : iocsh_utilities |
mrfioc2
 |
ESS Site-specific EPICS module : mrfioc2 |
devlib2
 |
e3 wrapper for EPICS devlib2 module. devLib2 is an extension to the EPICS OS independent VME bus access library found in the EPICS Base. |
MCoreUtils
 |
e3 wrapper for EPICS MCoreUtils module. The EPICS Multi-Core Utilities library contains tools that allow tweaking of real-time parameters for EPICS IOC threads running on multi-core processors under the Linux operating system. |
recsync
 |
e3 wrapper for EPICS recsync module. This module provides the client (RecCaster) which runs as part of an EPICS IOC. It sends the PV list in the IOC to a receiving server to populate the ChannelFinder directory service. |
s7plc
 |
e3 wrapper for EPICS s7plc module. The s7plc module provides support for the Siemens S7 series of PLCs. |
stream
 |
e3 wrapper for the EPICS StreamDevice module. StreamDevice is a generic EPICS device support for devices with a "byte stream" based communication interface. |
delaygen
 |
e3 wrapper for EPICS delaygen module. The delaygen module implements support for delay generator devices. |
iocStats
 |
e3 wrapper for EPICS iocStats module. iocStats provides support for records that show the health and status of an IOC, plus a few IOC control records. |
calc
 |
e3 wrapper for EPICS calc module. The calc module provides additional calculation record types, including string calculations, array calculation, and the multi-input, multi-output transform record. |
ip
 |
e3 wrapper for EPICS ip module. The ip module contains support for devices that communicate via ASCII (RS232, for example) or the stream device protocol. |
std
 |
e3 wrapper for the EPICS std module. This module provides the scaler, epid, and throttle records. |
sscan
 |
e3 wrapper for EPICS sscan module. This module contains the sscan record and related software for systematically moving positioners, triggering detectors, and acquiring and storing resulting data. |
sequencer
 |
e3 wrapper for EPICS sequencer module. The sequencer module provides a State Notation Language implementation, allowing application development in the form of finite state machines.
|
modbus
 |
e3 wrapper for EPICS modbus module. The modbus module supports communication with Programmable Logic Controllers (PLCs) and other devices via the Modbus protocol over TCP, serial RTU, and serial ASCII links. |
busy
 |
e3 wrapper for EPICS busy module. The busy module contains the busy record, which allows CA clients to indicate completion in a way that works with EPICS putNotify/ca_put_callback mechanism. |
asyn
 |
e3 wrapper for EPICS asyn module. asyn is a general purpose facility for interfacing device specific code to low level drivers. asynDriver allows non-blocking device support that works with both blocking and non-blocking drivers. |
caPutLog
 |
e3 wrapper for EPICS caPutLog module. caPutLog provides logging for Channel Access put operations. Any CA write to a PV is logged to a log server. |
autosave
 |
e3 wrapper for EPICS autosave module. autosave preserves PV values through an IOC reboot. |
base
 |
e3 wrapper for EPICS base. |
require
 |
e3-require builds and dynamically loads packaged modules into IOCs. |
adsis8300fc
 |
E3 wrapper for ADSIS8300 FC module |
adsis8300bpm
 |
E3 wrapper for ADSIS8300 BPM module |
adsis8300
 |
E3 wrapper for ADSIS8300 module |
admisc
 |
E3 wrapper for ADMisc module |
vac_starting_switchyard
 |
|
vac_ctrl_tcp350
 |
E3 wrapper for https://gitlab.esss.lu.se/epics-modules/vac/vac_ctrl_tcp350 |
vac_ctrl_leyboldtd20
 |
E3 wrapper for https://gitlab.esss.lu.se/epics-modules/vac/vac_ctrl_leyboldtd20 |
vac_ctrl_halrcrga
 |
E3 wrapper for https://gitlab.esss.lu.se/epics-modules/vac_ctrl_halrcrga |
vac_ctrl_mks946_937b
 |
E3 wrapper for https://gitlab.esss.lu.se/epics-modules/vac/vac_ctrl_mks946_937b |
xtpico
 |
e3 wrapper for xtpico. xtpico is a compact embedded network module used for many different applications at ESS. |
lodistribution
 |
|
ipmimanager
 |
e3 ipmiManager EPICS module. The ipmiManager module provides support for monitoring the status of components in MTCA crates via the IPMI protocol. |
lakeshore336
 |
EPICS E3 wrapper for lakeshore336 module |
rfqvoltprof
 |
|
fimioc
 |
ESS EPICS Environment (E3) layer that holds configuration files to build fimioc under E3 |
gammaspc
 |
Gamma SPC[e] E3 Wrapper |
rfcond
 |
|
piezodriver
 |
PiezoDriver IOC for ESS |
scaling
 |
|